Introducing the Latest
Fine Plasma Cutting Machine
from
KOMATSU
Twister Mark III a
Model TFP3051: 5x10
Model TFP 3062: 6x12
The Competition's Gas
Technology for Stn Steel & Alum.
AIR/METHANE:
* Expensive, unstable and presents O2 in Air
HYDROGEN-ARGON MIX/NITROGEN:
* Premix gas on .625" & .750" Stn. Stl. & Alum.
AIR or AIR/NITROGEN:
* Air cost effective, but produces worst results.
* Air/Nitrogen better, but still presents O2 in cut.
Komatsu's "Quick Silver" Technology for Stn Stl. & Alum.
NITROGEN:
* Provides near inert conditions.
* Lasers use same approach for clean cuts.
NITROGEN/PROPANE:
* Primary gas pure Nitrogen.
* Assist gas propane (75% carbon, 25% hydrogen)
* No oxygen present.
* Inexpensive, reliable, repeatable.
AIR/METHANE:
* Expensive, unstable and presents O2 in Air
HYDROGEN-ARGON MIX/NITROGEN:
* Premix gas on .625" & .750" Stn. Stl. & Alum.
AIR or AIR/NITROGEN:
* Air cost effective, but produces worst results.
* Air/Nitrogen better, but still presents O2 in cut.
Komatsu's "Quick Silver" Technology for Stn Stl. & Alum.
NITROGEN:
* Provides near inert conditions.
* Lasers use same approach for clean cuts.
NITROGEN/PROPANE:
* Primary gas pure Nitrogen.
* Assist gas propane (75% carbon, 25% hydrogen)
* No oxygen present.
* Inexpensive, reliable, repeatable.
Komatsu's "Quick Silver" Results
(Stn.Steel & Alum.)
Edge Quality using Plasma N2, Assist gas N2 + LPG
IMPROVED HOLE CUTTING
Komatsu 150 amp, 1/2" mild stl, 1/2" hole dia, .004" accuracy
Competitor, same cut, .016" accuracy. This means less post-processing.
Lower Running Costs thanks to Heat Shock Elimination with Komatsu's Main Gas Flow Pattern at Pierce and End Of Cut, providing Electrode Life up to 3 times longer than the competitors.
Return To Home Page
Edge Quality using Plasma N2, Assist gas N2 + LPG
IMPROVED HOLE CUTTING
Komatsu 150 amp, 1/2" mild stl, 1/2" hole dia, .004" accuracy
Competitor, same cut, .016" accuracy. This means less post-processing.
Lower Running Costs thanks to Heat Shock Elimination with Komatsu's Main Gas Flow Pattern at Pierce and End Of Cut, providing Electrode Life up to 3 times longer than the competitors.
There are many more features of Komatsu Twisters that make for a wise investment, such as:
Please give us a call to find out more about this excellent machine series. We are happy to setup an appointment to discuss all details.
- Retractable work stops.
- Dual linear guides on Y & Z axis.
- Single Drive system on long X axis to avoid crabbing experienced on dual drive systems.
- Anti splatter piercing technique to avoid damage to nozzle area.
- Push-Pull fume removal system to directly to exhaust versus up-flow systems.
- Part markers for drilling, punching later.
- Under the table slag and small part trays for easy removal of both.
- Low center of gravity of the cross beam making for maximum rigidity.